<strong>Videojet 8520 Machine：How to Adjust the Photoelectric？</strong>
After the ink cartridges are installed, let’s see how the machine works. It is now off. Click the blue button to start. If offline, press the green button to make it run. This is the true remaining amount of the cartridge. If there is no product, the photoelectric sensor will turn on the green light […]
<strong>Videojet 8520 machine:How to clean the print head if the print quality is not good?</strong>
Click on settings. Click on Supplies. Then place a clean cloth or a piece of paper underneath. Click to clean the nozzle and confirm. This is what it looks like after cleaning. If it is still not good after cleaning, then turn off the machine. First click the red Run button, then click the blue […]
<strong>How to Install the Videojet 8520 Machine Ink Cartridges？</strong>
First, wipe the cartridge with a lint-free cloth in one direction, don’t rub it back and forth. Lift the fixing plate up. The cartridge is tilted 45°, gently slide it in. Press it down again, and it is installed. Install all four ink cartridges in this way. Note: Do not hit the ink cartridge on […]
<strong>How to remove and install the pressure pump of Videojet 1000 series printers？</strong>
1.How to remove the pressure pump of the Videojet 1000 series printers？ Unscrew the screw above the cover. After the removal is complete, open the box, there are two cables inside, and remove them. Break it out and you can take it off. Note: These two wires and sockets should be in one-to-one correspondence, and […]
<strong> Videojet 8520 machine：How the machine was assembled and system configuration set up for the first time？</strong>
Install the sprinkler. The machine has a total of four nozzles, no matter how many nozzles there are, the installation method is the same. Fix the nozzle . There are screw holes on the side of the first, second, third and fourth nozzles. Fix the screws in the holes and tighten them. Then fix the […]
<strong>How to assemble the Unicorn II printer？</strong>
Install the two fixing blocks on it, and install the screws on both sides: Then put this bracket cylinder through and tighten the screws: After tightening, there is an adapter block here, which is a whole, the overall adapter block, and then put the bracket cylinder into it: After the sleeve is in, tighten the […]
<strong>How to see Videojet Ink Cartridge, Valve Module, and Print Module Replacement Precautions？</strong>
In the disassembly and installation, there are three large pieces, you need to pay attention to the ink core, pay attention to this joint, it must be tight, there can be no gaps, and don’t let it run out of gas. Pay attention to this pump, be sure to install it in place. It should […]
<strong>How to clean Videojet 43s？</strong>
After the Videojet 43s ink is drained, add about 500ml of cleaning solution to it for cleaning, cleaning for about 20 minutes, need to be cleaned two or three times, run for about 20 minutes, and pause the operation. Remove the pipe, put one end of the pipe into the waste liquid bucket, drain the […]
How to see Videojet ink core installation and ink core classification explanation？
1. How to install the ink core： Remove this thing first, and then remove the two screws on the side. After removing the part of the screws, you can remove the whole ink core. 2. Ink core classification Ink core, there are five types of A, B, C, D, E, this is the C type […]
How to clean Videojet 1000 series machines?
I. Ink discharge Remove the screw of the ink supply pipe of the printing module of the nozzle, and then put it on the waste liquid tank, and then clean the nozzle throat in the system until all the ink in the ink core is discharged. After the ink discharge is completed, install the screw […]