<strong>How to see Willett 640 machine supplies ink for the first time?</strong>
Take a look at the first ink supply of the 640 machine, first enter the high-level password, and then you can see the ink core level: Be sure to use the ear wash ball to manually inject the ink through the tube. When it shows high, you need to inject about 900ml to one liter […]
<strong>How to see Willett 640 common faults?</strong>
Let’s take a look at the common failures of 640 machines. The first is recycling failures. There are two types of recycling failures. One is the ink line deviation, which causes the ink line to fail to reach the recovery tank and reports a recovery failure. The other is the ink line caused by nozzle […]
<strong>How to see Willett 640 menu explanation?</strong>
Take a look at the menu explanation of the 640 machine, this is the home page, this is the button to start the ink line, this is the button to select information, this is to start printing, this is to adjust the information parameters, this is the printing delay, Message width, message height, and direction […]
<strong>How to see Willett 620 Information Editing?</strong>
Take a look at the message editor, select the tool: There is a new one in the information: To create a new message, there are additions and settings here: Take a look at the settings here. There is a setting for the maximum dot matrix, which can be selected. Now the maximum selected is 24 […]
<strong>How to see Willett 640 languages？</strong>
Look at the language of the 640 machine, click Settings: In the localization, you can see that there are languages, and there are three languages to choose from:
<strong>How to see Willett 620 languages？</strong>
Take a look at the language of this machine: Click the tool to enter the settings: There are language settings on the localization side, there are simplified, traditional, and English, and there are 3 languages for us to choose from:
<strong>How to see Willett </strong>620 first feed ink？
Let’s take a look atthefirst ink supply of the 620 machine, first turn on this switch, turn it on, and wait for about 30 seconds: The machine will enter the main interface, and it is now powered on: Because it is a new machine, there is no ink inside the ink core, you need to […]
<strong>How to view the common faults of Willett 620？</strong>
Take a look at the common faults. The first fault is high voltage fault. First, check if there is any dirt on the high voltage plate. After drying, the general problem will be solved: The second situation is that the ink dot split is not good, and the poor split of the ink dot will […]
How to see Willett 620 Menu Explanation?
Take a look at the menu explanation of the 620 machine. First of all, this is the main interface where the ink is displayed, and the solvent percentage is displayed here： Now there is no ink and solvent inserted below, so the display is 0%: Here is the total number of prints, and how many […]
<strong>Videojet 3640 Laser machine：How to assemble</strong>
It says “TOP” on it, put a thick pipe on it and screw it. The other end of this pipe, installed in this position, is screwed. This is the exhaust, the exhaust will be installed to the bottom, and both above and below. Then install this straw, installed in this position, is also an exhaust. […]