<strong>How to draw out of ink and clean machine for Willett 430 machine?</strong>
Remove the main filter: Then short it with a pipe: Open this bottle : Find an empty bottle and pull out this section: Insert the tube into the bottle: In the system, find out whether the nozzle pipe is clean or quickly start the code printer, click and confirm: Start ink-jet here: Drain the ink and […]
<strong>How to dismantle power 430 machine？</strong>
First remove the cover: Take this thing down again: Remove these wires: Remove the screws: Take out the keyboard: Remove these four screws and the display can be removed: Remove the mainboard and remove these wires first: Pull out all the cables below: Ink remover control board: When the power cord is disconnected, the ink machine […]
<strong>How to assemble the Videojet laser machine 3330?</strong>
There are four holes in the base for mounting this column: We can adjust the length of the cross arm by rotating this handle: This column is also adjusted by rotating this handle: This is the laser mount, which is a monolithic, mounted on the cross-arm: Here is the photoelectric bracket used to install the […]
<strong>How to edit and print messages in the Videojet Laser Machine 3330?</strong>
First select “Main Menu” in the screen and press Enter: Select “Profile” and press Enter: Press F2 to create a new message, then give the message a name, and press Enter when the name is complete: Then select “Edit Text”, press OK and we will be able to enter it directly here: If, after editing […]
<strong>How to start and change parameters and system settings in the Videojet laser machine 3330?</strong>
There’s a button under the console, and we press it down: Then, the light will come on, and when the light stops flashing and stays on, we’re done with the boot: After powering on, the handheld keyboard will power on: To turn on the laser, we need to spin the key, and then the light […]
<strong>How to adjust the print delay and photoelectric of the Videojet 1510 machine?</strong>
In the “Message Parameters”, select “Product Delay”, we can increase or decrease it according to the position of the printed product: Because the product is first photoelectric, then to the nozzle, and then printed. If 1 is where it is now printed to the product and 2 is where I want it to print, then I […]
<strong>How to deal with videojet 1510 machine recycling tank hanging ink, charging failure?</strong>
If printing two lines of words will be missing half, we open the nozzle cover, and then find the recycling tank hanging ink, how to solve this?First of all, we also look at the viscosity first, if the viscosity is high or low, we must first cycle it to a normal value, so that the […]
<strong>How to deal with the recovery fault and high voltage fault of Videojet 1510 machine?</strong>
Select “Nozzle Flush” here: Then press the Confirm key: Then use the cleaning pot to clean towards the nozzle: After washing, we blow dry it with an ear wash ball. Then press this key to turn on the machine normally, see if the fault is eliminated, if not eliminated, continue to use the “nozzle flush” […]
<strong>How to adjust the ink line of the Videojet inkjet printer?</strong>
The adjustment ink line has two directions, one is to the left or right: One is to adjust forward or backward: If we want to turn the ink thread forward or backward, we have to loosen the screw and loosen it half a circle: Then we adjust this screw: It will move here, the ink […]
<strong>How to insert logo pictures into Videojet 1210 inkjet printer?</strong>
We select a black-and-white picture, open it, take a screenshot of the picture, depending on the size of the image content: Save screenshot as BMP format: Then select the bmp picture you just stored, right-click the mouse, select Open Way, select Paint: In the drawing software, we select Resize and Select Pixels. The height of […]